NEWS CENTER - BMS ROLL FORMING
You are here: Home » News » Industry News » Omega Roll Forming Machine: Dedicated Purlin Tooling or Automatic Multi-Profile Equipment?

Omega Roll Forming Machine: Dedicated Purlin Tooling or Automatic Multi-Profile Equipment?

Views: 0     Author: Site Editor     Publish Time: 2026-11-19      Origin: Site

Inquire

Omega Roll Forming Machine: Dedicated Purlin Tooling or Automatic Multi-Profile Equipment?

  • Dedicated tooling

    Choose dedicated omega tooling if one section accounts for most of your work and you have a reliable way to cover the other sizes.

  • Automatic size-changing line

    Shortlist an automatic size-changing line if you often switch between sections that can share the same forming tools.

A difference in width may be something the rolls can adjust for. A new lip or a different bend angle may call for another tool set. Request quotes for the same finished parts. Then compare how much time automation would save on the size changes you still need after grouping orders by due date.

Define the omega section family

An omega section often has a raised center face, two sidewalls and outward feet. The name also appears on ceiling hat channels and some solar mounting parts. For your machine purchase, the drawing defines the profile. Two similar outlines can differ at the feet, where a return lip or a tighter inside radius changes the bend the tooling has to make.

  1. Put the drawings on the same basis

    Show the center face, overall width, sidewall height and angle, foot widths, inside radii, and any return lips or ribs. Use millimeters (mm) for dimensions and identify the drawing revision. Mark which dimensions stay fixed and which change from part to part.

  2. Assign a coil to each drawing

    Record the steel grade, thickness and coating. Include the developed strip width, which is the width of flat steel fed into the machine. The finished width is measured straight across the formed part. The feed strip must also supply the metal that forms the sidewalls and bends.

Which parts can share tooling?

  • Drawings A and B

    Suppose the bends and feet are identical but the center faces have different widths. Both parts are candidates for shared rolls.

  • Drawing C

    A return lip adds a bend and calls for a tooling review. If you rarely need C, price it as a separate tooling option or source it outside the line if your delivery plan allows.

Use a part number and revision for each row in your list. That gives a supplier a definite set of parts to cover. If the proposal says width and height are adjustable, ask which width and height combinations it will supply for the actual coils you need.

Compare dedicated and size-changing tooling

Roll tooling bends the strip a little at each stand. Dedicated rolls follow a sequence built for an agreed section. An adjustable machine may move parts of the roll assembly so that a common bend sequence can run at a different spacing. That movement can suit a width change between drawings A and B. The extra bend on drawing C may still need additional rolls.

What to compare in dedicated and automatic tooling quotes
What you need Dedicated tooling Automatic size-changing tooling
Section coverage List the drawings covered by each fixed roll set. Provide a route for the remaining parts. List complete drawing and coil combinations covered by the included tools. Quote exceptions separately.
Adjustable dimensions Confirm the fixed profile dimensions and the order settings you can change, such as cut length if supported. Mark each dimension the machine can adjust and any limits on using those adjustments together.
Tooling changes Price an additional roll set if a second section needs one. Include any guides and cut-off dies that change. List what stays in place, what moves automatically and what still needs an operator or a tool swap.
Punching Specify the hole positions and physical dies for the quoted section. Identify which patterns use the existing dies and which need a die change or a separate operation.
Material envelope Qualify the stated grade, coating, thickness and strip width for each roll set. Qualify those same properties at the required size combinations, including the toughest ones you actually order.
Trial evidence Inspect finished parts from the main roll set and any separate set included in the bid. Inspect parts on both sides of a frequent size switch and after changing back. Record measurements and all manual work.

Which options belong in your quote?

  • Mostly A

    If you can cover B and C economically elsewhere, carry a dedicated option into the tender.

  • Recurring A and B

    If the supplier can run both with shared rolls, ask for the automatic option.

  • C required in-house

    Require a priced route for it in both bids before comparing the totals.

BMS lists a heavy-duty automatic omega purlin roll forming machine for multiple sizes. Its published example uses 2.0–3.0 mm galvanized sheet and includes leveling and pre-punching. Ask BMS which of your drawing, coil and hole-pattern combinations the quoted line covers.

Specify leveling and punching scope

Follow the strip from the coil to the punch and into the rolls. When a change affects more than one station, the quote needs to cover each change. Adjusting forming rolls for a wider section can still leave different entry settings or a hole row that needs another die position.

Leveling and feeding

Coil can keep a lengthwise curve after it unwinds. A leveler passes the strip through rolls that bend it back and forth to reduce that curve. WorldAutoSteel’s AHSS Insights explains that the correction depends on thickness, yield strength and the equipment.

Your guides also have to place the strip correctly from side to side. Ask which guide and leveler settings change with coil width, grade or thickness and which settings the line can recall.

Hole spacing along the part

If two orders use the same punch and hole row, a change in lengthwise spacing may only require a different feed program.

Quote the actual pitch, meaning the distance between holes, along with the distances from the first and last holes to the cut ends.

Hole position across the part

A row that moves from the center face toward a bend can require the punch or die to move. Pre-punching makes the hole while the strip is flat. The later bend can stretch the nearby hole or shift it relative to the face where the fastener sits.

If you consider punching after forming, check access and support for the formed section.

Put your hardest hole pattern in the trial. Measure hole position from the reference face or edge on the finished drawing, and check the fit with the mating piece where it matters. A supplier can then quote which patterns share the in-line tools and which need a separate operation.

Compare changeover and order scheduling

Count the size switches you will still make after you group orders that share a setup. Start with part numbers, batch sizes and ship dates. Check which jobs can move earlier without excess stock and which need to run in sequence. Two sizes ordered every week can put very different demands on the same line.

Time a complete switch

For each common switch, time from the last acceptable part of the previous batch to the first acceptable part of the next. Include coil loading and threading when needed, punch and cut-off work, trial pieces and inspection. Time the switch back as well. A setting may move quickly while the crew still has to wait on another operation.

Four-order example

Assume the line starts set for A and four orders run A, B, A, B. Both bids have the same accepted running time. In either direction, a full size change takes 38 minutes with dedicated sets on a compatible base or 18 minutes on the automatic line. Both hypothetical times include the coil and first-part work.

Changeover time for the same four orders
Order sequence Total changeover time Time saved by automation
A → B → A → B (3 switches) 114 min dedicated / 54 min automatic 60 min
A → A → B → B (1 switch) 38 min dedicated / 18 min automatic 20 min

If shipping dates force the alternating sequence, you need all three switches. The grouped sequence works only if you can store the early A batch and still ship B on time.

Value the saved time

Use those minutes in your plant’s capacity plan. Time that avoids overtime or keeps another order on schedule has a value you can estimate. If both bids fit comfortably within the available shifts, a smaller switching burden may carry little value. When your dedicated bid covers A alone, include the time and cost of supplying B elsewhere before you compare it with the shared line.

Send the section-family RFQ

Give every bidder the same request for quotation (RFQ). List the parts your plant must make on the line and those you can price as options. Ask which drawing revisions the offer covers and which rolls, punches and cut-off tools it includes.

  • All omega drawings

    Include part numbers and revisions, the dimensions that vary, finished tolerances and each hole or slot pattern. Mark the reference faces, hole positions and cut lengths in mm.

  • Actual coil

    Give the grade, thickness in mm and coating, with the material certificate if available. Include the developed strip width for each part where known and provide coil dimensions and mass.

  • Orders and trials

    Send pieces per batch, batch frequency, due dates and the switches you want demonstrated. Ask for a trial with your specified coil. Request finished dimensions and hole positions against drawing tolerances for common and difficult parts, plus full changeover times and manual steps in both directions.

  • Your plant in Mexico

    Give the available voltage in volts (V), frequency in hertz (Hz) and number of phases. Specify the commissioning scope, including who unloads and installs the line, makes connections, supplies trial coil, trains operators and signs off the site run.

Use the drawing list and trial scope to check whether a lower bid leaves costs for your team to cover.

Send your section-family RFQ to BMS and request itemized dedicated and automatic options, with the tools, remaining manual steps and proposed trials for each.

Content list
ABOUT BMS
Founded in 1992, BMS Machinery joined XIAMEN BMS GROUP in 2017. Our manufacturing network in China includes 8 factories, 6 machining centers and 1 steel structure company, covering over 30,000 m². Supporting credentials include ISO9001:2015 quality management certification and SGS-issued CE/UKCA machinery compliance verifications. XIAMEN BMS GROUP’s Dun & Bradstreet D‑U‑N‑S Number is 55-379-8879.​​​​​​​
CONTACT BMS

  Office Address: 1002,Hualun International Mansion No.1, Guyan Road, Xiamen, Fujian,China.ZIP CODE: 36110 4
Factory Address: Longchi Development Area,Zhangzhou Taiwanese Investment Zone,Fujian Province,China (Zip Code:363107)
  +86-13328323529

  info@rollformingmill.com

   rollformingmill

Turkiye Distributor: 
DCB Metal Machinery
Address:İzmir Yolu Ertuğrul Mah. 146. Sok. Ruhi Plaza No:2/8 16120 Nilüfer/Bursa TÜRKİYE
GSM : +90 542 533 2080(Mr Ibrahim HARMAN- CEO)/+90 532 330 07 99(Mr Mr Hakan BAYRAKTAR-CTO​)​​
Web: www.dcbmachine.com
Copyright © 2026 BMS Machinery