Automatic Roof/Wall Panel Roll Forming Machine YX25-211-844
Profile
| No. |
Main Parameters |
Roll Forming Mill Parameters |
| 1. |
Decoiler |
Manual/Hydraulic for options |
Forming Stations |
14-step |
| 2. |
Cut-to-Length Tolerance |
≤±1 mm |
Base |
H400 |
| 3. |
Material Thickness |
0.3-0.6mm |
Side Wall Thickness |
Q235 t18mm |
| 4. |
Form Speed
|
20m/min |
Shaft Diameter |
ф65mm
|
| 5. |
Application Material |
Prepainted galvanized steel(PPGI) |
Main Motor Power |
5.5 KW |
| 6. |
Yield Strength |
Q235-Q350Mpa |
Screw Bolts |
Grade 8.8 |
| 7. |
Hydraulic Motor |
4 KW |
Cutting Tool Material |
Cr12MoV, heat treatment to HRC58-62 degree |
| 8. |
Effective Size |
As Customer Design |
Roller |
45# steel |
| 9. |
Control System |
PLC Control System |
Processing Mode |
CNC lathes, Hear Treatment, hard Chrome Coated, with thickness 0.04mm |
| 10. |
Testing Material |
BMS Will Provide The Size of Feeding Material to Purchase That 2 Weeks Before Machine Testing |
Work Flow
Decoiler→Manual Pre-Cutter→Guide Feeding →Roll Forming System→Hydraulic Post Cutter →Exit Rack
Machine Components Display
Pre-cutter Roll Forming Mill
Hydraulic Post Cutter PLC Control System
Machine Produced Products