| No. | Main Parameters | Roll Forming Mill Parameters | ||
| 1. | Material Thickness | 0.2-0.5mm |
Forming Stations | 12-step |
| 2. | Feeding Width |
According to the drawing |
Body Frame | European free standing structure |
| 3. | Application Material | Galvanized Coil |
Side Wall Thickness | 35mm |
| 4. | Electrical Standard |
220V60Hz/3Ph |
Shaft Diameter | 45# Steel, φ50mm |
| 5. | Manual Decoiler Diameter |
3T-300MM |
Main Motor Power | 7.5 KW |
| 6. | Yield Strength | G550Mpa |
Screw Bolts | Grade 8.8 |
| 7. | Forming Speed |
40m/min |
Effective Width |
As Customer Design |
| 8. | Control System | PLC Control System | Roller | Cr12(=D3 Steel) |
| 9. | Hydraulic Motor | 5.5KW | Machine Color |
Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
||
Work Flow
Manual Decoiler (3Tons) → Feeding Guide→ Main Roll Forming Mill → Post Flying Cutting Device → PLC Control System →Exit Rack
Machine Components Display
Lubrication Device
Main Roll Forming Mill
Post Flying Cutting Device
Exit Rack
Machine Produced Products
Double Furring Roll Forming Machine Finished Product