Standing Seam Roof Panel Roll Forming Machine
I. Machine Features
The equipment is light and easy carried by container, which is suitable for jobs with very long roof runs,
complex shapes or both BMS rollforming on-site reduces the risks in trainsport and handling of very long
panels eliminates step and expansion joints and allows precise matching of production with installation
schedules. Project for Singapore LYSAGHT Group LCP Building Products.
The produced Standing Seam Profile uses full 360° rolled seam to ensure weathertightness.
The produced Standing Seam Profiles Match with the sliding support, so that the entire roof system has functions for good wind resistance and perfect compensation of thermal expansion and cold contraction;
Size-change by Spacer, achieving one machine with 2 sizes: 400mm/408mm(UPGRADED PRODUCT-AUTOMATIC SIZE CHANGEOVER MODEL IN HOT SALES).
II. Machine Description
| Material |
Applicable material |
0.6-0.8mm PPGI / 0.7-1.2mm Aluminum
|
| Material thickness |
| With yield strength |
235-345MPa |
| Machine |
Base Frame |
H450 type steel |
| Roller Material |
40CR (AISI 5140/ EN41Cr4) |
| Roller station |
14-steps |
| Shaft diameter |
ф75mm |
| Working speed |
About 15-20m/min |
| Cutter |
Cutting tolerance |
≤±1mm |
| Material |
Cr12MoV(= SKD11 Steel) |
| Power |
Main motor |
4KW |
| Pump motor for cutter |
5.5KW |
| Voltage |
220/380/415/480V- 60/50Hz/3Ph --should be confirmed |
| PLC Control System |
Inverter: |
Schneider Electric/Siemens/DELTA (Taiwan brand) |
| Touch Screen: |
Schneider Electric/Siemens/WEINVIEW(Taiwan brand) |
| Encoder |
OMRON (Japan brand) or KOYO (Japan brand) |
III. Machine Components Display
Main Roll Forming Machine
IV. Machine Produced Products