Corner Trim V-Valley
Ridge Cap L Trim
| No. | Main Parameters | Roll Forming Mill Parameters | ||
| 1. | Material Thickness | 0.5-0.7mm |
Forming Stations | 16/16-step |
| 2. | Feeding Width |
according to the drawing |
Body Frame | H450 |
| 3. | Application Material | Galvanized Coil, PPGI |
Reducer | R series |
| 4. | Electrical Standard |
415V/50Hz/3ph |
Shaft Diameter | 45# Steel, φ85mm |
| 5. | Manual Decoiler Diameter |
508±30 mm |
Main Motor Power | 7.5 KW |
| 6. | Yield Strength | 220Mpa |
Screw Bolts | Grade 8.8 |
| 7. | Forming Speed |
12-15m/min |
Effective Width |
As Customer Design |
| 8. | Control System | PLC Control System | Roller | Cr12 Mov, CNC Lathes, Hear Treatment, HRC58-62 |
| 9. | Hydraulic Motor | 5.5KW |
Machine Color |
Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
||
Work Flow
Decoiler → Feeding Guide Device → Main Roll Forming Mill → Hydraulic Post Cutter → PLC Control System →Exit Rack
Machine Components Display
Feeding Guide Device Main Roll Gorming Mill
PLC Control System Main Driving Motor
Machine Produced Products
Trim Roll Forming Machine Finished Product
Application Case