Profile
| No. | Main Parameters | Roll Forming Mill Parameters | ||
| 1. | Material Thickness | 0.7-1.5mm |
Forming Stations |
9-steps |
| 2. | Feeding Width |
According to the drawing |
Body Frame |
H300 |
| 3. | Application Material | Al-Mg-Mn alloy&PPGI |
Side Wall Thickness |
16mm |
| 4. | Electrical Standard |
380V50Hz/3Ph |
Shaft Diameter |
Cr40, φ40mm |
| 5. | Decoiler Diameter |
5T-600MM |
Main Motor Power |
4KW |
| 6. | Yield Strength | Q235、3004H24 |
Screw Bolts |
Grade 8.8 |
| 7. | Forming Speed |
15-20m/min |
Effective Width |
According to the drawing |
| 8. | Control System |
PLC Control System |
Roller |
45# Steel,precision machined |
| 9. | Hydraulic Motor | 2.2KW | Machine Color |
Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
||
Work Flow
Decoiler (5Tons) → Feeding Device→ Main Roll Forming Mill → Hydraulic Post Cutting Device → PLC Control System → Hydraulic Station→Exit Rack*3
Machine Components Display
Feeding Device
Forming Rollers
Hand Wheel
PLC Control Cabinet
Machine Produced Products
Snap Lock Roll Forming Machine Finished Product
Application case
Application case