MACHINES

You are here: Home » Machines » Roll Forming Machines For Construction » Purlin Roll Forming Machine » Steel Floor Joist Roll Forming Machine

Share to:

Steel Floor Joist Roll Forming Machine

1 machine for both C Profile and SegmentedU Profile, by Quick-change cassette design

Availability:

Quantity:



Inquire Add to Basket

Model:
C&U140-300
Brand:
BMS

Profile

Product Description

Material	Applicable material	Galvanized sheet
	Material thickness	1.5-2.5mm
	With yield strength	550Mpa
Machine	Base Frame	H steel
	Side wall thickness	δ50 European Free Standing Structure
	Roller Material	Cr12 with heat treatment
	Roller station	22-steps to form
	Shaft diameter	ф75mm,High Frequency Processing
Power	Driving way	Gear/Sprocket transmission
Power	Main motor	18.5KW, Frequency Speed Control
PLC Control System	Inverter	Industrial computer
	Touch Screen
	Encoder
	Control Voltage	24V

Work Flow

Decoiler → Feeding and Leveling Device → Hydrualic Pre-Cutting&Punching Device→Rolling Forming System→Hydraulic Post Cutting →Product Support Frame

work flow

Technical Specifications

1) Hydraulic Decoiler:one set

Automatically control steel coil inner bore shrinkage and stop,

With electric control cabinet

Max. feeding width: 600mm, Coil ID Range : 470 – 560 mm.

Max capacity: 5Tons, No feeding power, hydraulic motor : 2.2KW

Hydraulic Decoiler

2) Main Machine

With feeding material guide and 5 rollers(2 upper rollers and 3 down rollers)for straightening and levelling

Leveling Device

With Punching Device, Die material: D2 steel, Heat treatment

2024_04_17_15_49_IMG_5200

Rollers manufactured from Cr12 with heat treatment

Motor Driving,Gear chain transmission,about 22 stepsto forming

Main Motor=18.5KW, Frequency speed control

Production speed approx. 12-15m/min

Roller

3) Hydraulic Post Cutting device

Pre-punching and pre-cutting, use the same hydraulic system

Hydraulic motor: 18.5KW, Hydraulic pressure range: 16Mpa

Post cutter

4) Computer control system

Description: can program the production data(batch,piece,punching position and punching quantity) in the office and then use a USB stick to copy to the computer system, run the machine with PLC control system, 10 inch touch screen operation, with USB connector, the precision is controlled within ±0.5mm,

computer

5) Exit Rack

6) Products Show

products show

Packaging & Shipping

Packing method:Main body of machine is naked and covered by plastic film(to protect of dust and corrosion),loaded into container and steadily fixed in container suitable by steel rope and lock, suitable for long-distance transportation.

20190812102601_56964

After-sale Service

1. The warranty is 24 months after the client receives the machine.
Within the 24 months, we will courier the replacement parts to the client free of charge.
2. We offer technical support for the entire life of our machines.
3. We can send our technicians to install and train the workers in the clients' factories with extra cost.