Availability: | |
---|---|
Quantity: | |
YX50-85/YX50-105
BMS
No. | Main Parameters | Roll Forming Mill Parameters | ||
1. | Material Thickness | 1.5-3.0mm | Forming Stations | 14-steps |
2. | Feeding Width | According to the drawing | Body Frame | H400 |
3. | Application Material | Galvanized sheet | Side Wall Thickness | 25mm |
4. | Electrical Standard | 380V50Hz/3Ph | Shaft Diameter | 45# Steel,80φ/φ65mm |
5. | Manual Decoiler Diameter | 508±30 mm | Main Motor Power | 18.5 KW |
6. | Yield Strength | G550Mpa | Screw Bolts | Grade 8.8 |
7. | Forming Speed | 25m/min | Effective Width | As Customer Design |
8. | Control System | PLC Control System | Roller | Cr12 steel,CNC lathes,Heat Treatment,hard Chrome Coated. |
9. | Hydraulic Motor | 7.5KW | Machine Color | Blue+Black+Orange |
Work Flow
Hydraulic Decoiler (5Tons) → Feeding Guide/ Leveling/Punching Device →Hydraulic Pre-cutter→ Main Roll Forming Mill → Hydraulic Post Cutter → PLC Control System →Exit Rack (3M*2)
Machine Components Display
Leveling Device
Post to cut, stop to cutting,Two pieces type of cutting blade design, no blanking
Hydraulic motor:7.5KW ;Cutting pressure: 0-16Mpa;
Cutting tool material: Cr12Mov(= SKD11 with at least one million times of cutting life), Heat treatment to HRC58-62 degree
With feeding material guide, body frame made from H400type steel by welding
Shafts manufactured from 45# steel,Quenching and tempering heat treatment, hard chrome plating.
Diameter=φ80/φ65mm,precision machined
PLC Control Cabinet
Post-cutter
Machine Produced Products
No. | Main Parameters | Roll Forming Mill Parameters | ||
1. | Material Thickness | 1.5-3.0mm | Forming Stations | 14-steps |
2. | Feeding Width | According to the drawing | Body Frame | H400 |
3. | Application Material | Galvanized sheet | Side Wall Thickness | 25mm |
4. | Electrical Standard | 380V50Hz/3Ph | Shaft Diameter | 45# Steel,80φ/φ65mm |
5. | Manual Decoiler Diameter | 508±30 mm | Main Motor Power | 18.5 KW |
6. | Yield Strength | G550Mpa | Screw Bolts | Grade 8.8 |
7. | Forming Speed | 25m/min | Effective Width | As Customer Design |
8. | Control System | PLC Control System | Roller | Cr12 steel,CNC lathes,Heat Treatment,hard Chrome Coated. |
9. | Hydraulic Motor | 7.5KW | Machine Color | Blue+Black+Orange |
Work Flow
Hydraulic Decoiler (5Tons) → Feeding Guide/ Leveling/Punching Device →Hydraulic Pre-cutter→ Main Roll Forming Mill → Hydraulic Post Cutter → PLC Control System →Exit Rack (3M*2)
Machine Components Display
Leveling Device
Post to cut, stop to cutting,Two pieces type of cutting blade design, no blanking
Hydraulic motor:7.5KW ;Cutting pressure: 0-16Mpa;
Cutting tool material: Cr12Mov(= SKD11 with at least one million times of cutting life), Heat treatment to HRC58-62 degree
With feeding material guide, body frame made from H400type steel by welding
Shafts manufactured from 45# steel,Quenching and tempering heat treatment, hard chrome plating.
Diameter=φ80/φ65mm,precision machined
PLC Control Cabinet
Post-cutter
Machine Produced Products
Shutter Door Roll Forming Machine Finished Product
Application Case (1)
Application Case (2)
Shutter Door Roll Forming Machine Finished Product
Application Case (1)
Application Case (2)