Light steel keel is a new type of building material, which is made of high-quality continuous hot-dip galvanized sheet and strip as raw material and rolled by cold bending process. It is used for the modeling and decoration of non-load-bearing walls and building roofs with lightweight boards such as paper gypsum board and decorative gypsum board. It is suitable for the modeling decoration of various building roofs, the internal and external walls of buildings and the basic material of scaffolding ceilings.

Here is the list

How to choose the material of light steel keel

As a new type of building material

Among many light steel keel manufacturers

The current light steel keel equipment uses aluminum alloy as the ceiling keel, and the aluminum alloy material is electro-oxidized to make it bright, stainless, and soft in color. However, most of them are still made of hot-dip galvanized steel strip through multiple processes. Our factory is a manufacturer of light steel keels and painted keels. We use rolling abrasives to produce them. The standard of light steel keels produced with galvanized steel strips is that the shape should be flat. The edges and corners are clear, the incision is free of burrs and deformation, and there is no peeling. The light steel keel made of galvanized material has good fire resistance, but it cannot be exposed to water.

How to choose the material of light steel keel

1. Ensure that the light steel keel has an advanced finishing system because the finishing system can help the product to have good flatness, straightness, and small internal stress, ensuring no stress deformation.

2. It is required to have excellent corrosion resistance. The product needs to use high-quality continuous hot-dip galvanized sheet as raw material, with strong adhesion of zinc layer, and the amount of double-sided galvanizing meets or exceeds the national standard for excellent products.

3. The product has a high-standard section size, which meets the relevant national standards and high-standard section size. The flange height is higher than the national standard, the moment of inertia is large, the structural stability is enhanced, and the construction is convenient. For example, the national standard stipulates that the height of the U-shaped keel flange of the partition wall is greater than 35 mm. The dragon keel I used before, its physical indicators are much higher than the national standard.

4. Product manufacturers should have strong innovation and R&D capabilities. Light steel keel product manufacturers should have unique patented product series, and try to have CH keel, Z-type sound insulation keel, unequal side keel, E-type keel and other special requirements products.

As a new type of building material

As a new type of building material, light steel keel has been sought after by many consumers since its listing. In our life, light steel keel can be seen everywhere, such as in hotels, airports, office ceilings and other places, light steel keels will be used. With the increasing use of light steel keel, the demand for light steel keel equipment has gradually increased. When we use light steel keel equipment, we must pay attention to daily maintenance and maintenance. The maintenance of the keel equipment will ensure its service life and performance.

Among many light steel keel manufacturers

Among many light steel keel manufacturers, they will formulate maintenance plans and detailed maintenance plans for the use of light steel keels, and in production, they will maintain and maintain them in strict accordance with the plan. The maintenance and maintenance of light steel keel equipment, then, during production, there will definitely be problems big and small. At this time, if our inspectors do not pay attention, it will cause product defects, affecting product quality and our manufacturers. reputation. When we are inspecting, it is not enough to just replace the parts. This can only solve the surface problem. We must inspect it carefully.

The maintenance and maintenance of light steel keel equipment cannot be ignored. As a professional light steel keel machine equipment manufacturer, we hereby remind everyone that we must conduct regular inspections, so as to avoid our mistakes, which will have a serious impact on our production and product quality.