Quick Details
Profile
| No. | Main Parameters | Roll Forming Mill Parameters |
| 1. | Material Thickness | 0.25-0.55 mm | Forming Stations | 18-step |
| 2. | Feeding Width | According to the drawing | Body Frame | H450
|
| 3. | Application Material | Galvanized Sheet | Side Wall Thickness | 18mm |
| 4. | Electrical Standard | 380V50Hz/3Ph
| Shaft Diameter | 45# Steel, φ75mm |
| 5. | Manual Decoiler Diameter |
508±30 mm | Main Motor Power | 11 KW |
| 6. | Yield Strength | G450-550 | Screw Bolts | Grade 8.8 |
| 7. | Forming Speed | 12m-15m/min | Effective Width | As Customer Design |
| 8. | Control System | PLC Control System | Roller | 45# steel, Hear Treatment, HRC58-62 |
| 9. | Hydraulic Motor | 5.5KW | Machine Color
| Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
Work Flow
Manual Decoiler (1.5Tons) → Feeding Guide Device → Main Roll Forming Mill → Hydraulic Post Cutter → PLC Control System →Exit Rack (3M*2)
Machine Components Display
Machine Produced Products