1. Manual De-coiler: one set
Capacity: MAX.3Tons;
Feeding width: Max. 600mm, coil ID range 508±30 mm
2. Leveling Device and Pre-punching device
Up four down three total seven roll straightening device
Stop to punching
3. Cold Rolling Mills
With feeding material guide,
body frame made from H450 steel plate welding, milling/polishing
Side wall thickness: 18mm
Rollers manufactured from 45#, CNC lathes, hard Chrome Coated;
Shafts Diameter=φ75mm,precision machined
Gear & chain drive, 20 steps to form
Main motor=11KW, Frequency speed control
Forming speed: Approx. 6m/min
All the screw bolts with grade 8.8(cheap factories use low grade 4.8) to ensure fix the machine structure tightly and long life during the machine long time running.
4.Pneumatic Saw Cutting device
With Saw Cutting Device; Stop to cut;
Cutting Blade Material: high speed steel cutting blade
Performance guarantee: Cutting should be smooth after adjustment.
5.PLC Control System
Control the quantity ,cutting length automatically
Combined With: PLC, Inverter, Touch Screen, Encoder, etc
PLC: Delta(TAIWAN brand)
Inverter: Delta(TAIWAN brand)
Touch Screen: WEINVIEW(TAIWAN brand)
Encoder: Omron (Japan brand)
Switch Bottom, Indicate Light, Power Supply, Intermediate Relay, AC Contactor, Thermal Relay: Schneider Electric(France brand)
Air Switch: LG-LS(Korea brand)
Cut-to-Length Tolerance≤±1 mm
Control Voltage 24V
6.Exit Rack un-powered, 2 units
Above specifications and photos are only for reference, the accurate one maybe slightly differ and need to refer to the machine.