Upright Roll Forming Machine For Multi Profiles

1 machine for multi-profiles to save investment, automatic changeover to improve working efficiency

Availability:

Quantity:



Inquire Add to Basket

Brand:
BMS

Quick Details

Profile

No.	Main Parameters		Roll Forming Mill Parameters
1.	Material Thickness	1.6-2.5mm	Forming Stations	18-step
2.	Feeding Width	According to the drawing	Body Frame	H450
3.	Application Material	Galvanized sheet/ Cold rolled sheet/Hot rolled sheet	Side Wall Thickness	25mm
4.	Electrical Standard	415V/50Hz/3Ph	Shaft Diameter	45# Steel, φ80/65mm
5.	Hydraulic Decoiler Diameter	5T-600mm	Main Motor Power	15 KW
6.	Yield Strength	G350-400Mpa	Screw Bolts	Grade 8.8
7.	Forming Speed	6-8m/min	Effective Width	As customer design
8.	Control System	PLC Control System	Roller	Gcr15 Steel, HRC58-62
9.	Hydraulic Motor	11KW	Machine Color	Blue+Black+Orange
10.	Testing Material	BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing

Work Flow

Decoiler (5Tons) → Leveling/Feeding Guide/Punching Device→ Main Roll Forming Mill → Hydraulic Post Cutting Device → Exit Rack*2 → PLC Control System → Hydraulic Station

Machine Components Display

Post Cutter

Un-powered, Manually control steel coil inner bore shrinkage and stop.

Max Feeding width: 1000mm,

coil ID range 508mm±30mm.

Capacity: Max. 5 Ton

Post to cut, stop to cutting,Two pieces type of cutting blade design, no blanking.
Hydraulic motor:11KW ;Cutting pressure: 0-16Mpa;

Cutting time:2s.
Cutting tool material: Cr12MoV(= SKD11 with at least one million times of cutting life), Heat treatment to HRC58-62 degree.
The cutting power is provided by the main engine hydraulic station.

016A5294

Decoiler

Servo Feeding Device

Up three down four totally seven shafts leveling device With feeding material guide, body frame made from H450 type steel by welding. Side wall thickness:Q235 t25mm. Shafts manufactured from 45# steel, precision machined. Motor power:2.2KW

63 Tons HIGH SPEED punching machine before roll forming, equip with one set of punching model.Punching machine four sides with safety cover and one side with open the door.By PLC system control.

016A5302