Quick Details
Profile
| No. | Main Parameters | Roll Forming Mill Parameters |
| 1. | Material Thickness | 0.7-1.5mm | Forming Stations |
9-steps
|
| 2. | Feeding Width | According to the drawing | Body Frame | H300
|
| 3. | Application Material |
Al-Mg-Mn alloy&PPGI
| Side Wall Thickness |
16mm
|
| 4. | Electrical Standard | 380V50Hz/3Ph
| Shaft Diameter | Cr40, φ40mm |
| 5. |
Decoiler Diameter
|
5T-600MM
| Main Motor Power |
4KW
|
| 6. | Yield Strength | Q235、3004H24 | Screw Bolts | Grade 8.8 |
| 7. |
Forming Speed
|
15-20m/min
|
Effective Width
|
According to the drawing
|
| 8. | Control System | PLC Control System | Roller |
45# Steel,precision machined
|
| 9. | Hydraulic Motor | 2.2KW | Machine Color
| Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
Work Flow
Decoiler (5Tons) → Feeding Device→ Main Roll Forming Mill → Hydraulic Post Cutting Device → PLC Control System → Hydraulic Station→Exit Rack*3
Machine Components Display
Machine Produced Products