Quick Details
Profile
No. | Main Parameters | Roll Forming Mill Parameters |
1. | Material Thickness | 0.2-0.5mm | Forming Stations | 12-step |
2. | Feeding Width | According to the drawing | Body Frame | European free standing structure
|
3. | Application Material | Galvanized Coil | Side Wall Thickness | 35mm |
4. | Electrical Standard | 220V60Hz/3Ph
| Shaft Diameter | 45# Steel, φ50mm |
5. | Manual Decoiler Diameter |
3T-300MM | Main Motor Power | 7.5 KW |
6. | Yield Strength | G550Mpa | Screw Bolts | Grade 8.8 |
7. | Forming Speed | 40m/min | Effective Width | As Customer Design |
8. | Control System | PLC Control System | Roller | Cr12(=D3 Steel) |
9. | Hydraulic Motor | 5.5KW | Machine Color
| Blue+Black+Orange |
10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
Work Flow
Manual Decoiler (3Tons) → Feeding Guide→ Main Roll Forming Mill → Post Flying Cutting Device → PLC Control System →Exit Rack
Machine Components Display
Post Flying Cutting Device
Machine Produced Products