Quick Details
Profile
| No. | Main Parameters | Roll Forming Mill Parameters |
| 1. | Material Thickness | 0.3-0.6mm | Forming Stations | 14-steps |
| 2. | Feeding Width | According to the drawing | Body Frame | H400
|
| 3. | Application Material | Galvanized sheet | Side Wall Thickness | 18mm |
| 4. | Electrical Standard | 220V60Hz/3Ph
| Shaft Diameter | 45# Steel, φ50mm |
| 5. | Manual Decoiler Diameter |
3T-300MM | Main Motor Power | 5.5KW |
| 6. | Yield Strength | 235-345Mpa | Screw Bolts | Grade 8.8 |
| 7. | Forming Speed | 20m/min | Effective Width | According to the drawing |
| 8. | Control System | PLC Control System | Roller |
45# Steel,precision machined |
| 9. | Hydraulic Motor | 3KW | Machine Color
| Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
Work Flow
Manual Decoiler (3Tons) → Feeding Guide→ Main Roll Forming Mill → Hydraulic Post Cutting Device → PLC Control System → Hydraulic Station→Exit Rack
Machine Components Display
Machine Produced Products