| No. | Main Parameters | Roll Forming Mill Parameters | ||
| 1. | Material Thickness | 0.3-0.6mm |
Forming Stations | 14-steps |
| 2. | Feeding Width |
According to the drawing |
Body Frame | H400 |
| 3. | Application Material | Galvanized sheet |
Side Wall Thickness | 18mm |
| 4. | Electrical Standard |
220V60Hz/3Ph |
Shaft Diameter | 45# Steel, φ50mm |
| 5. | Manual Decoiler Diameter |
3T-300MM |
Main Motor Power | 5.5KW |
| 6. | Yield Strength | 235-345Mpa |
Screw Bolts | Grade 8.8 |
| 7. | Forming Speed |
20m/min |
Effective Width |
According to the drawing |
| 8. | Control System | PLC Control System | Roller | 45# Steel,precision machined |
| 9. | Hydraulic Motor | 3KW | Machine Color |
Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
||
Work Flow
Manual Decoiler (3Tons) → Feeding Guide→ Main Roll Forming Mill → Hydraulic Post Cutting Device → PLC Control System → Hydraulic Station→Exit Rack
Machine Components Display
Main Roll Forming Mill
Hydraulic Station
Manual Decoiler
Post Cutter
Machine Produced Products
CU Drywall Partition Roll Forming Machine Finished Product
Application case
Application case