Quick Details
Profile
| No. | Main Parameters | Roll Forming Mill Parameters |
| 1. | Material Thickness | 2.0-3.0mm | Forming Stations | 16 Steps |
| 2. | Feeding Width | According to the drawings | Body Frame | H450
|
| 3. | Application Material | Galvanized sheet | Side Wall Thickness | European free standing structure |
| 4. | Electrical Standard | 380V50Hz/3Ph
| Shaft Diameter | 40Cr, φ90/75mm |
| 5. | Cutter material |
Cr12MoV | Main Motor Power | 11KW*2 |
| 6. | Yield Strength | 355Mpa | Screw Bolts | Grade 8.8 |
| 7. | Forming Speed | 25m/min | Effective Width | According to the drawing |
| 8. | Control System | PLC Control System | Roller |
Gcr15, Heat treatment HRC58—62
|
| 9. | Hydraulic Motor | 7.5KW | Machine Color
| Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
Work Flow
Decoiler → Feeding Device/Leveling Device/Pre-Punching Device→ Main Roll Forming Mill → Hydraulic Post Cutting Device → PLC Control System → Hydraulic Station→Exit Rack*3
Machine Components Display
Machine Produced Products