Profile
| No. | Main Parameters | Roll Forming Mill Parameters | ||
| 1. | Material Thickness | 2.0-3.0mm |
Forming Stations | 16 Steps |
| 2. | Feeding Width |
According to the drawings |
Body Frame | H450 |
| 3. | Application Material | Galvanized sheet |
Side Wall Thickness | European free standing structure |
| 4. | Electrical Standard |
380V50Hz/3Ph |
Shaft Diameter | 40Cr, φ90/75mm |
| 5. | Cutter material |
Cr12MoV |
Main Motor Power | 11KW*2 |
| 6. | Yield Strength | 355Mpa |
Screw Bolts | Grade 8.8 |
| 7. | Forming Speed |
25m/min |
Effective Width |
According to the drawing |
| 8. | Control System | PLC Control System | Roller | Gcr15, Heat treatment HRC58—62 |
| 9. | Hydraulic Motor | 7.5KW | Machine Color |
Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
||
Work Flow
Decoiler → Feeding Device/Leveling Device/Pre-Punching Device→ Main Roll Forming Mill → Hydraulic Post Cutting Device → PLC Control System → Hydraulic Station→Exit Rack*3
Machine Components Display
Punching Device
Hydraulic Pre-Cutting
Arch Structure
Straightening Roller
Machine Produced Products
Auto Changed Omega Purlin Roll Forming Machine Finished Product
Application case
Application case