Quick Details
Profile
No. | Main Parameters | Roll Forming Mill Parameters |
1. | Material Thickness | 0.4-0.6mm | Forming Stations | 18 Steps |
2. | Feeding Width | According to the drawings | Body Frame | H450 with lifting ring
|
3. | Application Material | Galvanized sheet/ Cold rolled sheet | Side Wall Thickness | 18mm |
4. | Electrical Standard | 220V60Hz/3Ph
| Shaft Diameter | 45# steel, φ70mm |
5. | Cutter material |
Cr12MoV | Main Motor Power | 11KW |
6. | Yield Strength | 235-345Mpa | Screw Bolts | Grade 8.8 |
7. | Forming Speed | 25m/min | Effective Width | According to the drawing |
8. | Control System | PLC Control System | Roller |
45# steel,CNC lathes,Heat Treatment
|
9. | Hydraulic Motor | 11KW | Machine Color
| Blue+Black+Orange |
10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
Work Flow
Decoiler → Feeding Device→ Main Roll Forming Mill → Hydraulic Post Cutting Device → PLC Control System → Hydraulic Station→Exit Rack*3
Machine Components Display
Machine Produced Products