Profile
| No. | Main Parameters | Roll Forming Mill Parameters | ||
| 1. | Material Thickness | 0.4-0.6mm |
Forming Stations | 18 Steps |
| 2. | Feeding Width |
According to the drawings |
Body Frame | H450 with lifting ring |
| 3. | Application Material | Galvanized sheet/ Cold rolled sheet |
Side Wall Thickness | 18mm |
| 4. | Electrical Standard |
220V60Hz/3Ph |
Shaft Diameter | 45# steel, φ70mm |
| 5. | Cutter material |
Cr12MoV |
Main Motor Power | 11KW |
| 6. | Yield Strength | 235-345Mpa |
Screw Bolts | Grade 8.8 |
| 7. | Forming Speed |
25m/min |
Effective Width |
According to the drawing |
| 8. | Control System | PLC Control System | Roller | 45# steel,CNC lathes,Heat Treatment |
| 9. | Hydraulic Motor | 11KW | Machine Color |
Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
||
Work Flow
Decoiler → Feeding Device→ Main Roll Forming Mill → Hydraulic Post Cutting Device → PLC Control System → Hydraulic Station→Exit Rack*3
Machine Components Display
Feeding Device
Main Roll Forming Mill
Post Cutter
Encoder
Machine Produced Products
Gable Trim Roll Former Finished Product
Application case
Application case