Octagonal-Tube Forming Machine for Galvanized Steel Coils 0.5-0.6mm

1. Manual De-coiler: one set

Capacity: MAX.3Tons;

Feeding width: Max. 600mm, coil ID range 508±30 mm

2. Leveling Device and Pre-punching device

Up four down three total seven roll straightening device

Stop to punching  

3. Cold Rolling Mills

With feeding material guide,

body frame made from H450 steel plate welding, milling/polishing

Side wall thickness: 18mm

Rollers manufactured from 45#, CNC lathes, hard Chrome Coated;  

Shafts Diameter=φ75mm,precision machined

Gear & chain drive, 20 steps to form

Main motor=11KW, Frequency speed control      

Forming speed: Approx. 6m/min

All the screw bolts with grade 8.8(cheap factories use low grade 4.8) to ensure fix the machine structure tightly and long life during the machine long time running.

4.Pneumatic Saw Cutting device

With Saw Cutting Device; Stop to cut;

Cutting Blade Material: high speed steel cutting blade

Performance guarantee: Cutting should be smooth after adjustment.

5.PLC Control System

Control the quantity ,cutting length automatically

Combined With: PLC, Inverter, Touch Screen, Encoder, etc    

PLC: Delta(TAIWAN brand)

Inverter: Delta(TAIWAN brand)

Touch Screen: WEINVIEW(TAIWAN brand)

Encoder: Omron (Japan brand)

Switch Bottom, Indicate Light, Power Supply, Intermediate Relay, AC     Contactor, Thermal Relay: Schneider Electric(France brand)

Air Switch: LG-LS(Korea brand)        

Cut-to-Length Tolerance≤±1 mm        

Control Voltage 24V

6.Exit Rack un-powered, 2 units

Above specifications and photos are only for reference, the accurate one maybe slightly differ and need to refer to the machine.

Packing method:Main body of machine is naked and covered by plastic film(to protect of dust and corrosion),loaded into container and steadily fixed in container suitable by steel rope and lock, suitable for long-distance transportation.