Shelving Horizontal Bracing Roll Forming Machine
I. Machine Features
Integrated online punching function for convenient installation.
The rollers are quenched after fine mechining with Cr12Mov (=D2=SKD11) mold steel, and heat treatment HRC 58-62, for long working lire more than 1o years.
Taiwan engineering design, Servo motor+ Gear driving for high accuracy forming, machine service life more than twice that of other lndian and Chinese cheap machines.
Hot Sales in Philippines and Indonesia.
II. Machine Description
| Material | Applicable material | GI(Galvanized Steel Sheet) |
| Material thickness | 0.6-1.0mm |
| With yield strength | 235-345MPa |
| Machine | Base Frame | H type steel |
| Roller Material | Cr12Mov (=D2=SKD11) |
| Roller station | 12-steps |
| Shaft diameter | ф40mm |
| Working speed | About 15-20m/min |
| Cutter | Cutting tolerance | ≤±1mm |
| Material | Cr12MoV(= SKD11 Steel) |
| Power | Main motor | 4KW |
| Pump motor for cutter | 5.5KW |
| Voltage | 220/380/415/480V- 60/50Hz/3Ph --should be confirmed |
| PLC Control System | Inverter: | Schneider Electric/Siemens/DELTA (Taiwan brand) |
| Touch Screen: | Schneider Electric/Siemens/WEINVIEW(Taiwan brand) |
| Encoder | OMRON (Japan brand) or KOYO (Japan brand) |
III. Machine Components Display
Main Roll Forming Machine
IV. Machine Produced Products
