Quick Details
Profile
No. | Main Parameters | Roll Forming Mill Parameters |
1. | Material Thickness | 1.5-3.0mm | Forming Stations | 28-steps |
2. | Feeding Width | 130-200 | Body Frame | H450
|
3. | Application Material |
SuperDyma/Galvanized sheet/Black strip
| Side Wall Thickness | 18mm |
4. | Electrical Standard | 380V50Hz/3Ph
| Shaft Diameter | 45# Steel, φ85mm |
5. | Manual Decoiler Diameter |
3T-500MM | Main Motor Power | 15KW |
6. | Yield Strength | 345-550Mpa | Screw Bolts | Grade 8.8 |
7. | Forming Speed | 0-35m/min | Effective Width | According to the drawing |
8. | Control System | PLC Control System | Roller |
Cr12 Steel,precision machined |
9. | Hydraulic Motor | 5.5KW | Machine Color
| Blue+Black+Orange |
10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
Work Flow
Manual Decoiler (5Tons) → Leveling Device/Punching Device→ Main Roll Forming Mill → Automatic non-stop sawing device → PLC Control System → Hydraulic Station→Exit Rack*2
Machine Components Display
Machine Produced Products