Publish Time: 2022-05-31 Origin: Site
Previously we have described what we should do to prepare before using the CZ purlin roll forming machine and how we should check the CZ purlin roll forming machine. In this article, we will continue what we have done before and talk about how to use the CZ purlin roll forming machine.
Here is the list of contents
Machine test run
Start production
Finish production
Before officially starting up and using the machine, it is important to test run the machine so that we can check the operation of the machine and directly identify some simple and common causes of failures. The following are the steps of the machine test run.
l Connect the power cord to the machine.
l Turn on the main power switch.
l Turn on the machine.
l Wait for the control system to start.
l Turn on the emergency stop button.
l Manually test the machine in forward and reverse operation.
l Check the machine for normal forward and reverse rotation.
l Start the hydraulic station.
l Manual test run of the rear knife.
l Check whether the cutting is abnormal.
l Run the machine at no load for 2 minutes with no material in the machine.
l Check whether the machine runs abnormally and whether there is vibration.
After the machine test run without any malfunction, it is ready for the official production work. All steps of the CZ purlin roll forming machine are capable of a high degree of automation. The following are the steps of the CZ purlin roll forming machine for production.
l Place the fed material into the machine.
l Roll forming.
l When the material is 20-30mm from the rear cutter opening.
l Slow entry into the rear cutter opening.
l Manual cut of the material head.
l Turn on the PLC cabinet interface
l Enter the production interface (data setting)
l Set batch, length, and quantity in sequence according to the production task.
l Set the measured length of the machine to zero.
l Switch the production mode to automatic mode.
l Start the automatic production of the host machine.
l Receive the completed profile
When the production is finished and the CZ purlin roll forming machine needs to be shut down, you need to follow the following steps.
l First, switch the automatic mode of the control system to the manual mode before shutting down the hydraulic system. This is essential because you cannot operate the machine manually while the control system remains in automatic mode.
l Secondly, press the emergency stop button of the CZ purlin roll forming machine.
l Finally, open the PLC cabinet door, turn off the main machine and power supply, then close the PLC cabinet door, and the whole process of using the CZ purlin roll forming machine is finished!
Xiamen BMS Group was originally established in 1996. We have 8 factories and 20 years of experience in the field. We understand the special requirements of customers in different countries and regions and are confident in the quality and precision of our products. Our products have been exported to more than 80 countries and regions, including Korea, the UK, France, the USA, Canada, etc. We guarantee the safety of your money and business. If you are interested in our products and want to get a product quote, welcome to contact us!