1) Hydraulic Decoiler:one set
Automatically control steel coil inner bore shrinkage and stop,
With electric control cabinet
Max. feeding width: 600mm, Coil ID Range : 470 – 560 mm.
Max capacity: 5Tons, No feeding power, hydraulic motor : 2.2KW
2) Main Machine
With feeding material guide and 7 rollers(3 upper rollers and 4 down rollers)for straightening and levelling
With Punching Device, Die material: D2 steel, Heat treatment
Body frame made from H300# type steel by welding;
Cassette body frame made from 200# H type steel by welding
Side wall thickness: 18mm
Rollers manufactured from Bearing steel GCr15(=EN31 steel), precision machined,hard Chrome Coated
Motor Driving,Gear chain transmission,about 22 +16 steps to forming
Main Motor=11KW, Frequency speed control
Production speed approx. 11m/min ( including punching and cutting time)
3) Hydraulic Post Cutting device
Pre-punching and pre-cutting, use the same hydraulic system
Hydraulic motor: 4KW, Hydraulic pressure range: 16Mpa
4) PLC Control System
Control The Quantity And Cutting Length Automatically.
Input The Production Data(Production Batch,pcs,Length,etc.) On The Touch Screen.
It Can Finish The Production Automatically.
Combined With: PLC, Inverter, Touch Screen, Encoder, etc.
5) Exit Rack
6) Products Show