Quick Details
Profile
| No. | Main Parameters | Roll Forming Mill Parameters |
| 1. | Max. Feeding Width | 950mm/1000mm
| Forming Step | 20-step |
| 2. | Length Tolerance | ±1mm（6M） | Base | H450 |
| 3. | Inspection Thickness | 0.4-0.6mm | Side Wall Thickness | Q235 t18mm |
| 4. | Product Speed | 10m/min
| Shaft
| 45# steel, φ90/75mm |
| 5. | Application Material | Prepainted Galvanised Steel(PPGI)
| Roller | 45# steel, Rough turning, CNC lathes, Heat Treatment, Brushed and Polished |
| 6. | Yield Strength | 350Mpa | Main Motor | 7.5KW |
| 7. | Effective Width Tolerance | -2/+3mm | Reduce Speed | R Series |
| 8. | Material Thickness | 0.4-0.6mm | Chain | ZIQIANG |
| 9. | Control System | PLC Control System | Forming Speed | 12-16m/min |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase That 2 Weeks Before Machine Testing |
Work Flow
Feeding Guide Device → Manual Pre-cutter → Main Roll Forming Mill→ Hydraulic Post-cutter → PLC System → Hydraulic Station →Exit Rack
Machine Components Display
1）Manual Decoiler: 2sets
2) Cold Rolling Mill:
With feeding material guide, body frame made from H450 type steel by welding;
With manual precutter for easy operation and save material:
Sideboard thickness: 22mm
Rollers manufactured from 45# steel, CNC lathes, Heat Treatment, hard Chrome Coated with thickness 0.04mm ,surface with mirror treatment
Shafts Diameter=ф90mm/ ф75mm, precision machined;
3) Hydraulic Post Cutting device:
Post cut, stop to cutting, two pieces cutting blades, no blanking
Hydraulic motor: 4kw, Hydraulic pressure range: 0-8Mpa
Cutting tool material: Cr12MoV(= SKD11 with at least one million times of cutting life), Heat treatment to HRC58-62 degree
The cutting power is provided by the main engine hydraulic station
4) PLC Control System
Control the quantity and cutting length automatically
Combined with: PLC, Inverter, Touch Screen, Encoder, etc
Cut-to-Length Tolerance≤±1 mm
Control Voltage 24V
5) Exit rack:
Un-powered, 2 units, with rollers on it for easy movement