| No. | Main Parameters | Roll Forming Mill Parameters | ||
| 1. | Effective Width | 1000mm | Forming Stations | 18-steps |
| 2. | Feeding Width | About 1220 mm | Base | H450 |
| 3. | Material Thickness | 0.35-0.8mm | Side Wall Thickness | Q235 t18mm |
| 4. | Form Speed |
18-20m/min | Shaft Diameter | ф85mm Round Steel |
| 5. | Application Material | Galvanized Steel(GI) |
Main Motor Power | 7.5KW |
| 6. | Yield Strength | 345-550Mpa | Screw Bolts | Grade 8.8 |
| 7. | Coil ID range | 508mm±30mm | Puching Shear | Cr12MoV Hydraulic Post Cutter |
| 8. | Effective Size | As Customer Design | Roller | 45# steel |
| 9. | Control System | PLC Control System | Processing Mode | CNC lathes, Hear Treatment, hard Chrome Coated, with thickness 0.04mm |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase That 2 Weeks Before Machine Testing |
||
Decoiler→Manual Pre-Cutter→Guide Feeding →Roll Forming System→Hydraulic Post Cutter →Exit Rack
Decoiler Roll Forming Mill
Hydraulic Post Cutter PLC Control System
Machine Produced Products