Quick Details
Profile
| No. | Main Parameters | Roll Forming Mill Parameters |
| 1. | Material Thickness | 0.7-1.2mm | Forming Stations | 16-step |
| 2. | Feeding Width | according to customers' demand | Body Frame | H600
|
| 3. | Application Material | Galvanized Coil | Reducer | K series |
| 4. | Electrical Standard | 415V/50Hz/3ph
| Shaft Diameter | 45# Steel, φ60mm |
| 5. | Manual Decoiler Diameter |
508±30 mm | Main Motor Power | 7.5 KW |
| 6. | Yield Strength | 245-345Mpa | Screw Bolts | Grade 8.8 |
| 7. | Forming Speed | 12-18m/min | Effective Width | As Customer Design |
| 8. | Control System | PLC Control System | Roller | Cr12 Mov, CNC Lathes, Hear Treatment, HRC58-62 |
| 9. | Servo Motor | 4KW | Machine Color
| Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
Work Flow
Manual Decoiler (5Tons) → Feeding Guide Device → Main Roll Forming Mill → Hydraulic Post Cutter → PLC Control System →Exit Rack (3M*2)
Machine Components Display
Feeding Guide device
Roll Forming Mill
Body frame made from H600 type steel by welding
Side wall thickness: Q235 t18mm
Shafts manufactured from 45# Steel, Shaft Diameter: φ60mm
Spacer made from Cr12, CNC lathes, Hard chrome platingtreatment
Every Machine with Cold Water Device. Gear & Chain drive about 16-step to form
Produced Speed: 12-18m/min
All the screw bolts with grade 8.8 (Cheap factories use low grade 4.8) to ensure fix the machine structure tightly and long life during the machine long time running.
Hydraulic Post Cutter Device
Made by high quality mold steel Cr12MoV with heat treatment
Cutter frame made from high quality steel plate by welding
Hydraulic motor: 3.0KW
Machine Produced Products