Publish Time: 2022-10-21 Origin: Site
Cut to length and slitting line is a kind of machine tool. It is driven by hydraulic pressure, with reliable safety performance and convenient operation.
Below is a directory
l Product introduction of Cut to length and slitting line
l Features of Cut to length and slitting line
l Precautions when using Cut to length and slitting line
Cut to length and slitting line uncoiling, leveling, measuring, crossing length and stacking can be done. This kind of Cut to length and slitting line machine is mainly used in cold-rolled coil, hot-rolled coil, stainless steel coil, galvanized coil, electrical appliance, automobile and other machinery manufacturing industries. The Cut to length and slitting line performs various business functions, including sheet leveling, trimming (if required), Cut to length and slitting line and stacking board. Cut to length and slitting lines can ensure accurate feeding and shearing machine. It can be widely used for cold-rolled or hot-rolled carbon steel, tinplate, stainless steel and all other kinds of metal materials and surface coatings. The Cut to length and slitting line has the function of automatically cutting steel plates to length, and can cut all kinds of cold rolled plate materials into different specifications through uncoiling, leveling and longitudinal cutting. These Cut to length and slitting line lines can also automatically stack these different scissors neatly.
Using the Cut to length and slitting line machine can significantly improve the production efficiency, reduce the cost, ensure the product quality, and greatly improve the market competitiveness.
(1) The Cut to length and slitting line is hydraulically driven, which is easy to operate and maintain.
(2) Working edge length: 400mm, 600mm700mm800mm1000mm1200mm, with 8 grades of shear force ranging from 63T to 400t. The shearing machine with a knife edge of more than 700mm is especially suitable for shearing scrap automobiles.
(3) The diesel engine can be used as a power source where there is no power supply.
1. do not start Cut to length and slitting line without learning and understanding the structure, performance and operating procedures of Cut to length and slitting line.
2. each lubricating part of Cut to length and slitting line shall be filled with lubricating oil at least once per shift as required.
3. high quality anti-wear hydraulic oil shall be strictly used for the hydraulic oil added into the oil tank, which must be strictly filtered, and sufficient oil volume shall be maintained frequently. If it is insufficient, the oil shall be filled immediately.
4. the oil tank shall be cleaned and replaced with new oil once every six months, but the first cleaning and filtering of oil shall not exceed one month. The new oil used once is allowed to be reused after strict filtration.
5. in case of serious oil leakage or abnormal phenomena during operation, stop Cut to length and slitting line immediately, analyze the causes and eliminate the faults, and do not forcibly operate with faults.
6. during the operation or packaging of Cut to length and slitting line, it is not allowed to repair or touch the moving parts with hands. It is strictly prohibited to press the materials in the material box with hands or feet
7. the adjustment of pump, valve and pressure gauge must be carried out by experienced technical workers. If the pressure gauge is found to be faulty, it shall be checked or replaced immediately.
BMS Group was originally established in 1996. We have 8 factories and over 25 years of experience in the industry. We understand the special requirements of our customers in different countries and regions and are confident in the quality and precision of our products. Our products have been exported to more than 80 countries and regions, including Korea, the UK, France, the USA, Canada, etc. We guarantee the safety of your money and business. If you are interested in our products and want to get a product quote, welcome to contact us!