Profile
No. | Main Parameters | Roll Forming Mill Parameters | ||
1. | Material Thickness | 0.75-1.5mm | Forming Stations | 24+24Steps |
2. | Feeding Width | 1219mm/1250mm | Body Frame | H450 |
3. | Application Material | Galvanized sheet | Side Wall Thickness | Q235 t25mm |
4. | Electrical Standard | 480V/60Hz/3Ph | Shaft Diameter | 45#Steel, φ75mm |
5. | Cutter material | Cr12MoV | Main Motor Power | 18.5+18.5KW |
6. | Yield Strength | G345Mpa | Screw Bolts | Grade 8.8 |
7. | Forming Speed | 15-20m/min | Effective Width | 914.4mm |
8. | Control System | PLC Control System | Roller | Gcr15, Heat treatment HRC58—62 |
9. | Hydraulic Motor | 7.5KW | Machine Color | Blue+Black+Orange |
10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
Work Flow
Decoiler → Feeding Device→ Main Roll Forming Mill → Hydraulic Post Cutting Device → PLC Control System → Hydraulic Station→Exit Rack*3
Feeding Device
Safety Shield
Clutch Device
Hydraulic Pre-cutter
Packing method:Main body of machine is naked and covered by plastic film(to protect of dust and corrosion),loaded into container and steadily fixed in container suitable by steel rope and lock, suitable for long-distance transportation.
Terms of Trade
1.Minimum order quantity (MOQ): 1 Set
2.Delivery time: about 45 workdays
3.Port of loading: port of Xiamen
4.Type of payment: by T/T or by L/C
5.Export:to more than 50 countries and regions, including Taiwan, UK, France, Singapore,Greece, Australia, USA, Mexico, Brazil, Chile, Bolivia, Trinidad, Israel, Saudi Arabia, etc
AG Panel Roll Forming Machine Application case
Finished Product
Finished Product