Quick Details
Profile
| No. | Main Parameters | Roll Forming Mill Parameters |
| 1. | Feeding Width | 145mm/157mm
| Forming Step | 16-step |
| 2. | Length Tolerance | ±0.5mm（6M） | Forming Speed
| 12-15m/min |
| 3. | Inspection Thickness | 0.5 mm | Side Wall Thickness | Q235 t18mm |
| 4. | Product Speed | 12-15m/min
| Shaft
| 45# steel, φ70mm |
| 5. | Application Material |
Aluminum Alloy 303 H46, Color Coating
| Roller | 45# steel, Rough turning, CNC lathes, Heat Treatment |
| 6. | Yield Strength | 180-200Mpa | Main Motor | 5.5KW |
| 7. | Oil Pump Motor | 4KW | Hydraulic Post-cutter | Cr12MoV |
| 8. | Material Thickness | 0.5 mm | Protecting Cover | Movable |
| 9. | Control System | PLC Control System | Base | H450
|
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase That 2 Weeks Before Machine Testing |
Work Flow
Decoiler→ Feeding Guide Device → Main Roll Forming Mill → Hydraulic Cutter→ Hydraulic System→ PLC System → Exit Rack*2
Machine Components Display
1) Decoiler:
Manual Decoiler: one set
Un-powered,manually control steel coil inner bore shrinkage and stop
Max. feeding width: 500mm, coil ID range 470mm±30mm
Capacity: Max. 3Ton
2) Roll Forming Mill
Body frame made from H450 type steel by welding
Side wall thickness: Q235 t18mm;
Shafts manufactured from 45# steel, Shaft Diameter: φ70mm
Gear & Chain drive about 16-step to form.
Forming Speed: 12-15m/min;
Main Motor:5.5KW; Chain:ZIQIANG
All the screw bolts with grade 8.8 (Cheap factories use low grade 4.8) to ensure fix the machine structure tightly and long life during the machine long time running.
3) Hydraulic Cutter
Post To Cut,Stop To Cutting,Two Pieces Type Of Cutting Blade Design
Hydraulic Motor:4KW,Cutting Pressure:0-16Mpa
Cutting Tool Material:Cr12MoV(= SKD11 Steel)
With At Least One Million Times Of Cutting Life),Heat Treatment HRC58-62
Product Application Case
Machine Produced Products