| No. | Main Parameters | Roll Forming Mill Parameters | ||
| 1. | Material Thickness | 0.35-0.45mm |
Forming Stations | 18-step |
| 2. | Feeding Width |
According to the drawing |
Body Frame | H450 |
| 3. | Application Material | Galvanized Coil & PPGI |
Side Wall Thickness | 18mm |
| 4. | Electrical Standard |
380V50Hz/3Ph |
Shaft Diameter | 45# Steel, φ75mm |
| 5. | Manual Decoiler Diameter |
5T-1250MM |
Main Motor Power | 7.5 KW |
| 6. | Yield Strength | 235-345Mpa |
Screw Bolts | Grade 8.8 |
| 7. | Forming Speed |
4-6m/min |
Effective Width |
1000MM |
| 8. | Control System | PLC Control System | Roller | 45# Steel, CNC lathes, Heat Treatment |
| 9. | Hydraulic Motor | 7.5KW | Machine Color |
Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
||
Work Flow
Manual Decoiler (5Tons) → Feeding Guide→ Main Roll Forming Mill → Hydraulic Post Cutting Device (Two Pieces Cutting Blades) → Exit Rack*3 → PLC Control System → Hydraulic Station
Machine Components Display
Embossing Device
Un-Powered,Manually Control Steel Coil Inner Bore Shrinkage And Stop
Max Feeding Width:1200mm,
Coil ID Range:508mm±30mm
Capacity:Max.5 Ton
Hydraulic Station
Decoiler
Hydraulic Motor: 11KW
Post Cutter
Machine Produced Products
Big Bamboo Tile Roll Forming Machine Finished Product
Application case