| No. | Main Parameters | Roll Forming Mill Parameters | ||
| 1. | Material Thickness | 2.0-4.0mm |
Forming Stations | 22-steps |
| 2. | Feeding Width |
360mm |
Body Frame | H450 |
| 3. | Application Material | Galvanized Sheet |
Side Wall Thickness | 25mm |
| 4. | Electrical Standard |
380V50Hz/3Ph |
Shaft Diameter | 45# Steel, φ75mm |
| 5. | Decoiler |
Manual/Hydraulic for Options |
Main Motor Power | 30KW*2 |
| 6. | Yield Strength | 235-345Mpa |
Screw Bolts | Grade 8.8 |
| 7. | Forming Speed |
15m/min |
Effective Width |
159mm |
| 8. | Control System | PLC Control System | Roller | 45# Steel,precision machined |
| 9. | Hydraulic Motor | 7.5KW | Machine Color |
Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
||
Work Flow
Manual Decoiler (5Tons) → Leveling Device→ Main Roll Forming Mill → Hydraulic Post Cutting Device → PLC Control System → Hydraulic Station→Exit Rack
Machine Components Display
Main Roll Forming Mill
PLC Control System
Post cutter
Machine Produced Products
Container House Bottom Beam Roll Forming Machine Finished Product
Application case
Application case