Profile
| No. | Main Parameters | Roll Forming Mill Parameters | ||
| 1. | Material Thickness | 0.8-1.2mm |
Forming Stations | 22 stations |
| 2. | Feeding Width |
392mm |
Body Frame | H450 |
| 3. | Application Material | Aluminum magnesium zinc plate |
Side Wall Thickness | 18mm |
| 4. | Electrical Standard |
380V50Hz/3Ph |
Shaft Diameter | 45# Steel, φ70mm |
| 5. | Cutter material |
Cr12MoV |
Main Motor Power | 11KW |
| 6. | Yield Strength | 420Mpa |
Screw Bolts | Grade 8.8 |
| 7. | Forming Speed |
10-15m/min |
Effective Width |
According to the drawing |
| 8. | Control System | PLC Control System | Roller | Cr12 ,precision machined |
| 9. | Hydraulic Motor | 5.5KW | Machine Color |
Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
||
Machine Components Display
Feeding Device
Main Roll Forming Mill
Post Cutter
Post to cut, stop to cutting, Two pieces type of cutting blade design, no blanking
Hydraulic motor: 5.5KW
Cutting tool material: Cr12MoV(= SKD11 with at least one million times of cutting life), Heat treatment to HRC58-62 degree
The cutting power is provided by the main engine Independent hydraulic station
PLC Control Cabinet
PLC: Siemens (German brand) /Schneider Electric(French brand)
Inverter: Siemens (German brand) /Schneider Electric(French brand)
Touch Screen: Siemens (German brand) /Schneider Electric(French brand)
Encoder: Omron brand (Japan)
Cut-to-length tolerance≤±1 mm
Control Voltage 24V
Machine Produced Products
Waterproof Solar Mounting Frame Roll Forming Machine Finished Product
Application case
Application case