| No. | Main Parameters | Roll Forming Mill Parameters | ||
| 1. | Material Thickness | 0.35-0.42mm |
Forming Stations | 20-step |
| 2. | Feeding Width |
914mm |
Body Frame | H400 |
| 3. | Application Material | Galvalume/galvanized sheet, PPGI |
Side Wall Thickness | 18mm |
| 4. | Electrical Standard |
380V50Hz/3Ph |
Shaft Diameter | 45# Steel, φ70mm |
| 5. | Manual Decoiler Diameter |
508±30 mm |
Main Motor Power | 7.5 KW |
| 6. | Yield Strength | G550Mpa |
Screw Bolts | Grade 8.8 |
| 7. | Forming Speed |
15-20m/min |
Effective Width |
As Customer Design |
| 8. | Control System | PLC Control System | Roller | 45# steel, Hear Treatment, HRC58-62 |
| 9. | Hydraulic Motor | 3KW | Machine Color |
Blue+Black+Orange |
| 10. | Testing Material | BMS Will Provide The Size of Feeding Material to Purchase that 2 Weeks Before Machine Testing |
||
Work Flow
Manual Decoiler (5Tons) → Feeding Guide Device → Main Roll Forming Mill → Hydraulic Post Cutter → PLC Control System →Exit Rack (3M*2)
Machine Components Display
Feeding Device
PLC Control Cabinet
Main Machine Mill
Post-cutter
Machine Produced Products
Shutter Door Roll Forming Machine Finished Product
Application Case